These high pressure jet nozzles are made from abrasion resistant tungsten carbide. Fashioned after the popular Smith series 65 tri-cone bit nozzles. Their compact size makes them ideal for incorporating into various downhole tools, including but not limited to, bits, hole openers, fly-cutter reamers, barrel reamer’s, or any tooling where high pressure, high velocity fluid is required. They are designed to compress fluids as they passed through the nozzle thus increasing the velocity as it acts as a nozzle.
High pressure flow across the cutting surface increases ROP (rate of penetration) as well as increasing the life of the cutters. By efficiently removing the cuttings away from the leading edge of the cutter insurers that cuttings are not being re-cut or act as an abrasives which will shorten the life of any cutter.
Nozzles can be ordered in a variety of nozzle sizes ranging from 07 | 08 | 09 | 10 | 12 | 14 | 16. For smaller sizes please contact us for delivery time.
Free Series 65 Carbide Nozzle Drawings and Dimensions PDF Download
General overall dimensions of a Series 65 Carbide jet nozzle. These dimensions can be used to determine the suitability of this nozzle for your application and or to confirm the series 65 is interchangeable with your current nozzle. Note that the critical dimension is generally the OD, with the overall height being less critical. Some tooling designs will accept the carbide nozzle directly otherwise, we recommend our threaded Nozzle Retainer.
Enter your email address for instant drawing downoad.
[contact-form-7 404 "Not Found"]